Removing the front panel to protect your unit from
theft
1
Press the detach button to release the front
panel.
2
Grab the front panel and remove.
3
Always keep the detached front panel in the pro-
tection device such as protection case.
Re-attaching the front panel
1
Slide the front panel to the left until it clicks.
Front panel and the head unit are connected on
the left side. Make sure that the front panel has
been properly connected to the head unit.
2
Press the right side of the front panel until it is
firmly seated.
If you can
’
t attach the front panel to the head unit
successfully, try again. However, forcing the front
panel into place may result in damage.
Turning the unit on
1
Press
SRC
/
OFF
to turn the unit on.
Turning the unit off
1
Press
SRC
/
OFF
and hold until the unit turns off.
Selecting a source
1
Press
SRC
/
OFF
to cycle between:
DEH-4200SD
TUNER
(tuner)
—
CD
(built-in CD player)
—
USB
(USB)/
USB-iPod
(iPod)
—
SD
(SD memory card)
—
AUX
(AUX)
DEH-3200UB
TUNER
(tuner)
—
CD
(built-in CD player)
—
USB
(USB)/
USB-iPod
(iPod)
—
AUX
(AUX)
Adjusting the volume
1
Turn
M.C.
to adjust volume.
Note
When this unit
’
s blue/white lead is connected to
the vehicle
’
s auto-antenna relay control terminal,
the vehicle
’
s antenna extends when this unit
’
s
source is turned on. To retract the antenna, turn
the source off.
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category (the folder/ca-
tegory one level higher)
1
Press
/
DISP
/
SCRL
.
Returning to the main menu
Returning to the top tier of list/category
1
Press and hold
/
DISP
/
SCRL
.
Returning to the ordinary display
Canceling the initial setting menu
Returning to the ordinary display from the list/cate-
gory
1
Press
BAND
/
ESC
.
Tuner
Basic Operations
Selecting a band
1
Press
BAND
/
ESC
until the desired band (
FM1
,
FM2
,
FM3
for FM or
MW/LW
) is displayed.
Manual tuning (step by step)
1
Push
M.C.
left or right.
Seeking
1
Push and hold
M.C.
left or right, and then re-
lease.
You can cancel seek tuning by pushing
M.C.
left
or right.
While pushing and holding
M.C.
left or right, you
can skip stations. Seek tuning starts as soon as
you release
M.C.
Note
This unit
’
s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to page 9).
Operating this unit
En
7
English
Section
02
