Using PI Seek
If the tuner cannot find a suitable station, or
reception status deteriorates, the unit automa-
tically searches for a different station with the
same programming. During the search,
PI seek
is displayed and sound is muted.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, the
unit can be set to perform PI Seek during pre-
set recall.
!
The default setting for Auto PI Seek is off.
Refer to
Storing and recalling stations
You can easily store up to six stations for each
band as presets.
Using preset tuning buttons
1
When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2
Press one of the preset tuning buttons
(1 to 6) to select the desired station.
Using preset screen
1
Press
to switch to the preset screen.
2
Use M.C. to store the selected fre-
quency in memory.
Turn to change the preset number. Press and
hold to store.
3
Use M.C. to select the desired station.
Turn to change the station. Press to select.
Note
You can also recall stored radio stations by push-
ing
M.C.
up or down during the frequency dis-
play.
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
%
Press
/DISP/SCRL.
Program service name
—
PTY information
—
Frequency
#
PTY information and the frequency appear on
the display for eight seconds.
Advanced operations using
special buttons
Receiving traffic announcements
TA (traffic announcement standby) lets you receive traf-
fic announcements automatically, regardless of the
source you are listening to.
1
Tune in a TP or enhanced other network
’
s TP station.
2
Press
TA
/
NEWS
to turn traffic announcement stand-
by on or off.
3
Use
M.C.
to adjust the TA volume when a traffic an-
nouncement begins.
The newly set volume is stored in memory and re-
called for subsequent traffic announcements.
4
Press
TA
/
NEWS
while a traffic announcement is
being received to cancel the announcement.
The tuner returns to the original source but remains
in the standby mode until
TA
/
NEWS
is pressed
again.
Using news program interruption
When a news program is broadcast from a PTY code
news station, the unit automatically switches to the
news broadcast station. When the news program ends,
reception of the previous program resumes.
1
Press
TA
/
NEWS
and hold to turn on or off news pro-
gram interruption.
A news program can be canceled by pressing
TA
/
NEWS
.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Operating this unit
En
8
Section
02
