FM step
(FM tuning step)
Normally the FM tuning step employed by seek tuning
is 50 kHz. When AF or TA is on, the tuning step auto-
matically changes to 100 kHz. It may be preferable to
set the tuning step to 50 kHz when AF is on.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the FM tuning step.
100kHz
(100 kHz)
—
50kHz
(50 kHz)
3
Press
M.C.
to confirm the selection.
Auto PI
(auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1
Press
M.C.
to turn Auto PI seek on or off.
AUX
(auxiliary input)
Activate this setting when using auxiliary device con-
nected to this unit.
1
Press
M.C.
to turn
AUX
on or off.
USB PnP
(plug and play)
This setting allows you to switch your source to
USB
/
USB-iPod
automatically.
1
Press
M.C.
to turn the plug and play on or off.
ON
–
When USB storage device/iPod is con-
nected, the source is automatically switched to
USB
/
USB-iPod
. If you disconnect your USB sto-
rage device/iPod, this unit
’
s source is turned off.
OFF
–
When USB storage device/iPod is con-
nected, the source is not switched to
USB
/
USB-
iPod
automatically. Please change the source to
USB
/
USB-iPod
manually.
Brightness
(display brightness setting)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to switch the brightness setting.
High
(high)
—
Low
(low)
3
Press
M.C.
to confirm the selection.
SW control
(rear output and subwoofer setting)
Only for DEH-4200SD
.
This unit
’
s rear output (rear speaker leads output) can
be used for full-range speaker (
Full
) or subwoofer
(
SUBW
) connection. If you switch the rear output set-
ting to
SUBW
, you can connect a rear speaker lead di-
rectly to a subwoofer without using an auxiliary amp.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to change the setting.
Rear SP
:
Full
—
SUBW
3
Press
M.C.
to confirm the selection.
Only for DEH-3200UB
.
The rear speaker leads output (
Rear SP
) and RCA out-
put (
Preout
) of DEH-3200UB can be used for full-
range speaker (
Rear SP
:
Full
/
Preout
:
Rear
) or sub-
woofer (
Rear SP
:
SUBW
/
Preout
:
SUBW
) connection.
If you switch to
Rear SP
:
SUBW
, you can connect a
rear speaker lead directly to a subwoofer without
using an auxiliary amp.
Initially,
Rear SP
is set for rear full-range speaker con-
nection (
Full
). When
Rear SP
:
Full
is selected, you can
connect the RCA output to a subwoofer. In this case,
you can select whether to use the subwoofer control-
ler
’
s (low pass filter, phase) built-in
Preout
:
SUBW
or
the auxiliary
Preout
:
Rear
.
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to cycle between as following:
Rear SP
/
Preout
—
Full
(
SUBW
)/
SUBW
(
Rear
)
3
Turn
M.C.
to change the setting.
Rear SP
:
Full
—
SUBW
Preout
:
SUBW
—
Rear
!
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to
!
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
4
Press
M.C.
to confirm the selection.
DEMO
(demo display setting)
1
Press
M.C.
tp turn the demo display on or off.
Ever SCRL
(scroll mode setting)
When Ever Scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1
Press
M.C.
to turn the ever scroll on or off.
Title
(multi language)
This unit can display them even if they are embedded
in a European language or Russian.
Text information such as title name, artist name or
comment can be recorded on a compressed audio
disc.
!
If the embedded language and the selected lan-
guage setting are not the same, text information
may not be displayed properly.
!
Some characters may not be displayed properly.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the desired setting.
EURO
(European)
—
RUSSIA
(Russian)
3
Press
M.C.
to confirm the selection.
Operating this unit
En
16
Section
02
