En
9
English
Rear panel
4
5
6
2
1
3
7
6
5
8
a
b
c
d
9
1
MASTER OUT 1 terminals
Connect powered speakers, etc., here.
2
MASTER OUT 2 terminals
Connect to a power amplifier, etc.
3
BOOTH OUT terminals
Output terminals for a booth monitor, compatible with balanced or
unbalanced output for a TRS connector.
4
MIC2 terminal
Connects a microphone here.
5
CD terminals
Connect to a DJ player or other line level device.
6
PHONO/LINE input terminals
Connect a phono level output device (analog player (for MM car-
tridges), etc.) or a line level output device (DJ player, etc.) here.
Switch the terminals’ function according to the connected device
using the [
INPUT SELECT
] switch on this unit’s front panel.
7
SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
8
MIC1 terminal
Connects a microphone here.
9
Kensington security slot
a
䢢
USB
䢢
terminal
Connect to a computer.
b
STANDBY/ON switch
This switches this unit’s power between on and standby.
c
DC IN terminal
Connect to a power outlet using the included AC adapter (with the
power plug mounted).
d
Cord hook
Catch the AC adapter’s power cord and USB cable on this hook
when using this unit.
Front panel
1
2
5
3
4
3
4
1
PHONES jacks
Connect headphones here.
Both stereo phone plugs (
Ø
6.3 mm) and stereo mini phone plugs
(
Ø
3.5 mm) can be used.
2
HEADPHONES LEVEL control
Adjusts the audio level output from the [
PHONES
] jack.
3
INPUT SELECT switch
Selects the input source of each channel from the components con-
nected to this unit.
—
[
PC
]: Select this to use the track loaded in the Serato DJ soft-
ware’s deck.
—
[
MIC1
] or [
MIC2
]: Select one of these to use the microphone con-
nected to the [
MIC1
] or [
MIC2
] terminal.
—
[
CD
]: Select this to use a line level output device (DJ player, etc.)
connected to the [
CD
] terminals.
4
INPUT SELECT switch
Selects the input source of each channel from the components con-
nected to this unit.
—
[
PC
]: Select this to use the track loaded in the Serato DJ soft-
ware’s deck.
—
[
PHONO
]: Select this to use a phono level (for MM cartridges)
output device (analog player, etc.) connected to the [
PHONO/
LINE
] input terminals.
—
[
LINE
]: Select this to use a line level output device (DJ player,
etc.) connected to the [
PHONO/LINE
] input terminals.
5
CROSS FADER CURVE selector switch
This switches the crossfader curve characteristics.
