Pioneer DDJ-SX2, Руководство по эксплуатации

Страница: 8 / 124

En
8
Mixer section
INST. DOUBLES INST. DOUBLES INST. DOUBLES INST. DOUBLES
c
d
4 4
e
g
f
h
b
1 2 1 2 1 2 1 2
5
3
9
7
4
6
a
5 5
5
3
9
4
6
a
8
7
8
1
FX 1 assign button
Turns the effect unit FX1 on/off.
2
FX 2 assign button
Turns the effect unit FX2 on/off.
3
TRIM control
Adjusts the output size.
4
EQ (HI, MID, LOW) controls
Boosts or cuts frequencies.
5
Channel Level Indicator
Displays the sound level of the respective channels before passing
through the channel faders.
6
FILTER control
Applies the filter effect.
7
Headphones CUE/MIC TALK OVER button
The sound of channels for which the headphones [
CUE
] button is
pressed is output to the headphones.
When the [
INPUT SELECT
] switch for Channel 3 or Channel 4 is set
to [
MIC1
] or [
MIC2
], the talk over function can be turned on/off using
the switch.
[
SHIFT
] + press:
The track’s tempo can be set by tapping the button. (Tap function)
8
Headphones CUE button
The sound of channels for which the headphones [
CUE
] button is
pressed is output to the headphones.
[
SHIFT
] + press:
The track’s tempo can be set by tapping the button. (Tap function)
9
Channel fader
Move:
Adjusts the level of audio signals output in each channel.
[
SHIFT
] + move:
Use the channel fader start function.
a
Crossfader Assign Switch
Assigns the channel output to the crossfader.
b
Crossfader
Outputs the sound assigned with the crossfader assign switch.
[
SHIFT
] + move:
Uses the crossfader start function.
c
MASTER LEVEL control
Adjusts the master sound level output.
d
Master level indicator
Displays the master output’s audio level.
e
Booth monitor level control
Adjusts the level of audio signals output from the [
BOOTH OUT
]
terminal.
f
HEADPHONES MIX control
Adjusts the balance of the monitor volume between the sound of the
channels for which the headphones [
CUE
] button is pressed and the
sound of the master channel.
g
MASTER CUE button
Turns monitoring of the master output’s sound on and off.
h
SAMPLER VOLUME fader
Adjusts the sampler’s overall sound level.
Effect section
1 1 1 2
3 3 3 4
1
Effect parameter controls
These adjust the effects’ parameters.
2
FX BEATS control
Adjusts the effect time.
3
Effect parameter buttons
Turns the effect on and off or switches the parameter.
[
SHIFT
] + press:
Switches the effect type.
4
TAP button
The BPM used as the base value for the effect is calculated by the
interval at which the button is tapped with a finger.
When the button is pressed and held, the effect time is reset.
[
SHIFT
] + press:
Switches the effect mode.