Pioneer DDJ-RX, Руководство по эксплуатации

Страница: 25 / 32

En
25
Advanced
Operation
Mixer section
a
b
2 2
c
e
d
9
3
1
7
5
2
4
8
3 3
3
1
7
2
4
8
6
5
6
1
TRIM control
2 EQ
(
HI
,
MID
,
LOW
) controls
3
Channel Level Indicator
4 COLOR
control
5
Headphones CUE / MIC TALK OVER button
6
Headphones CUE button
7
Channel fader
8
Crossfader Assign Switch
9
Crossfader
a
MASTER LEVEL control
b
Master level indicator
c
BOOTH MONITOR LEVEL control
d SOUND COLOR FX buttons
e
MASTER CUE button
Front panel
1 5 3 2 4 4 3
1 HEADPHONES LEVEL
control
2
HEADPHONES MIX control
3 INPUT SELECT
switch
4
INPUT SELECT switch
5 CROSS FADER CURVE
selector switch
Mixing the sound of the microphone
1 Connect a microphone to the [MIC1] or [MIC2] terminal.
2 Set the [INPUT SELECT] switch to [MIC1] or [MIC2].
3 Operate the [TRIM] control and channel fader to adjust the
sound level output from each channel.
! The sound can be adjusted with the [ EQ ( HI , MID , LOW )] controls and the
selected
SOUND COLOR FX
can be applied using the [
COLOR
] control.
! The sound volume of channels for which the [ INPUT SELECT ] switch is set to
[
MIC1
] or [
MIC2
] does not change even when the crossfader is moved.
Mixing the sound of a DJ player, etc.
1 Connect the DJ player or other line level output device to
the [CD] or [PHONO/LINE] terminals.
2 Set the [INPUT SELECT] switch to [CD] or [LINE].
3 Operate the [TRIM] control and channel fader to adjust the
sound level output from each channel.
!
The sound can be adjusted with the [ EQ ( HI , MID , LOW )] controls and the
selected SOUND COLOR FX can be applied using the [ COLOR ] control.
Mixing the sound of an analog turntable, etc.
1 Connect the analog player or other phono level (for MM
cartridges) output device to the [PHONO/LINE] terminals.
! Make sure to connect the ground wire of an analog player to this
unit’s SIGNAL GND terminal.
2 Set the [INPUT SELECT] switch to [PHONO].
3 Operate the [TRIM] control and channel fader to adjust the
sound level output from each channel.
! The sound can be adjusted with the [
EQ
(
HI
,
MID
,
LOW
)] controls and the
selected SOUND COLOR FX can be applied using the [ COLOR ] control.