Pioneer CDJ-2000NXS, Руководство по обслуживанию

Страница: 34 / 158

34
CDJ-2000NXS
1 2 3 4
A
B
C
D
E
F
1 2 3 4
6. SERVICE MODE
6.1 SERVICE MODE
The following service modes are prepared for this unit.
1
Confirmation of the button input and an indication function.
It is the mode which checks each input and display function of a button, a JOG dial, the slider volume, a encoder and a
needle pad.
2
Check mode of the load of JOG dial.
It is the mode which measures the load when rotating JOG dial.
3
Indication of various information
It is a mode displaying information such as a version and an error history, a device normal / abnormality judgment.
4
Error display list
An error code and the contents are shown.
5
Drive Self-Diagnosis
It is the mode which performs self-diagnosis of a drive unit.
6
Contents of drive self-diagnosis
It is explanation of the contents of self-diagnosis of a drive unit.
7
Confirmation of movement of the drive unit
It is the mode which checks operation of a mechanism and servo of drive unit.
8
Output of the alarm port
Explanation of the meaning of output of status terminal on a PC Board Assy.
9
Firmware update.
Explanation of the method of firmware update.
OUTLINE OF THE SERVICE MODE
DETAILS OF THE SERVICE MODE
[1] Confirmation of the button input and an indication function
When it spends a power supply while pushing a TEMPO button and a MEMORY button simultaneously, It is displayed in the
LCD display part, "CDJ-2000
N XS SER V ICE MODE", and enters into this mode.
(Please continue pushing until "Pioneer LOGO" screen disappears.)
When it enters this mode, the TAG-TRACK button is pushed, and the screen is sent as follows, the following status displays
are done.
In this mode, the input of each button, JOG, volume, etc. is normal, and it can check that a display can also be performed
normally.
In addition, indication turns on while you push a button.
Caution: In this status display, if a TOUCH/BRAKE knob is turned to the limit of the right, it will shift to "the load measurement
mode of JOG."(Refer to the following clause. )
BUTTO N : The pushed button name is displayed.
JOG : The point moves according to the direction that JOG turned.
E
N CODER : The point moves according to the direction that E N CODER
switch turned.
N EEDLE : The point moves according to the direction to which touched the
needle pad and it was made to move.
SLIDER V OLUME : If a TEMPO slider knob is moved to the - side, a bar
display will increase.
JOG TOUCH V OLUME : If a TOUCH/BRAKE knob is turned to the right,
a bar display will increase.
JOG RELEASE V OLUME : If a RELEASE/START knob is turned to the right,
the Bar display will increase.