Pioneer CDJ-2000NXS, Руководство по обслуживанию

Страница: 45 / 158

45
CDJ-2000NXS
5 6 7 8
5 6 7 8
A
B
C
D
E
F
[7] Confirmation of movement of the drive unit
It is within "[3] Indication of V arious Information" mode, and the following control becomes possible when the screen of
“
6
the drive operation/error rate measurement” is chosen.
This mode consists of "player operation mode" and "test operation mode."
<Player operation mode>
Basic operation of Servo, such as setup, play, pause, and track search, is carried out.
Moreover, measurement of an error rate can also be performed.
<Test operation mode>
Servo operation is finely controllable gradually.
* It becomes player operation mode and shifts to test operation mode by the key input in the beginning.
* The command treated here is for mainly testing a mechanism and a servo system, and is not for DJ functions, such as scan
and tempo.
Player operation mode command
Play(Trace) / Pause
If it is in a stop state, it will set up and play. Moreover, if it is in a play state, whenever it will push a button, a pause and a
play are carried out by turns.
It is displayed on a drive state display part as "PLAY or PAUSE."
In the case of CD, the track number and time under present trace are displayed.
In the case of D V D, the layer number under present trace is displayed on the place of TRACK, and it displays a physical
address on the place of MSF.
Note: In this mode, even if it inserts a disk, an automatic setup is not carried out.
Moreover, a play is not carrying out audio reproduction, but is tracing the signal side of a disk.
Track Search F/R
Search a track displayed by a FWD / RE V course and, in the case of a CD, do pause.
It is indicated with [SEARCH] in the drive condition indication part.
Note: A track search is not possible in CD-ROM (MP3/AAC/WA V /AIFF).
Whenever a FWD / RE V direction is pushed, search it with the following turn and, in the case of D V D, do a pause.
When a FWD direction was pushed with DUAL LAYER DISC.
→
L0 inside
→
L0 middle
→
L0 outside
→
L1 inside
→
L1 middle
→
L1 outside
→
When a RE V direction was pushed with DUAL LAYER DISC.
←
L0 inside
←
L0 middle
←
L0 outside
←
L1 inside
←
L1 middle
←
L1 outside
←
When a FWD direction was pushed with SI N GLE LAYER DISC.
→
L0 inside
→
L0 middle
→
L0 outside
→
When a RE V direction was pushed with SI N GLE LAYER DISC.
←
L0 inside
←
L0 middle
←
L0 outside
←
Function Main unit button
<Player operation mode>
Servo All Off (Stop)
TIME
Play(Trace) / Pause PLAY/PAUSE
Track Search Fwd/Rev TRACK SEARCH FWD/RE V
Error Rate Count CUE
Eject EJECT
Mode Change (-> Test operation mode) MASTER TEMPO
<Test operation mode>
Servo All Off
TIME
CD Select MEMORY
D V D Select DELETE
Focus Jump Up LOOP I N
Focus Jump Down LOOP OUT
Slider Move Fwd SEARCH FWD
Slider Move Rev SEARCH RE V
Step command CUE/LOOP CALL N EXT(
d
)
Mode Change (->Player operation mode) MASTER TEMPO