Pioneer C-AX10, Руководство по обслуживанию

Страница: 119 / 120

119
C-AX10
8.2 SPECIFICATIONS
7
Digital preamplifier
Number of quantizing bits
Digital input ..................................................... 16 – 24 bits/linear
Analogue input ....................................................... 24 bits/linear
Sampling frequency
Digital input ....................... 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz,
(automatic 96 kHz, 176.4 kHz, 192 kHz detection)
(176.4 kHz and 192 kHz are possible only when using PDIF
connections.)
Analogue input ................................................................. 96 kHz
Frequency characteristics (Direct function is on)
Digital input ........................................................... 5 Hz – 44 kHz
..................................................... (Sampling frequency: 96 kHz)
Analogue input LINE ......................................... 5 Hz – 44 kHz
PHONO (MM) ...................................... 20 Hz – 20 kHz
±
0.3 dB
S/N ratio (Normal, 2-channel mode)
Digital input ............................. 118 dB min. (acoustic correction)
Analogue input
LINE ........................................ 115 dB min. (acoustic correction)
PHONO(MM) ............ 84 dB min. (IHF A network, short circuit)
................................................................... (when 6 mV is input)
Dynamic range (Direct function is on, Normal, 2-channel mode)
Digital input .............................................................. 110 dB min.
Analogue input ........................ 108 dB min. (except for PHONO)
Total harmonic distortion
(Direct function is on, Normal, 2-channel mode)
Digital input .......................................................... 0.0010% max.
Analogue input .................... 0.0012% max. (except for PHONO)
Channel separation (Normal and 2-channel mode)
Digital input ............................................... 115 dB min. (20 kHz)
Tone control .......................................................
±
6 dB 0.5 dB-steps
BASS ................................................................. 150 Hz, 300 Hz
MID ............. 400 Hz, 500 Hz, 630 Hz, 800 Hz, 1.0 kHz, 1.2 kHz
TREBLE ................................................................ 3 kHz, 10 kHz
Analogue maximum allowable input (Input gain: –6 dB)
LINE ....................................................................................... 5 V
PHONO (MM) ...................................................... 45 mV (1 kHz)
7
Input/output jacks
Analogue input jack ...........
RCA 4-line(Input impedance: 50 k
Ω
)
......................... (one of these lines supports multichannel input)
Analogue output jacks
Preout
[Output impedance: 100
Ω
( max.)] ................. Front:2 RCA lines
.................................................................. Surround: 1 RCA line
.................................................................... Centre: 2 RCA lines
.............................................................. Subwoofer: 2 RCA lines
.................................................................. REC out: 2 RCA lines
........................................................... (Output impedance: 1 k
Ω
)
Digital input jacks
Coaxial 3-line: ........................ 0.5 Vp-p(Input impedance: 75
Ω
)
Optical 3-line
Digital output jacks
Coaxial 1-line: ..................... 0.5 Vp-p (Output impedance: 75
Ω
)
Optical 1-line
÷
The signal format during PDIF mode is Pioneer’s own custom
format, and it does not conform to the IEC60958 standards.