82
AVIC-W8400NEX/XNUC
1
2
3
4
A
B
C
D
E
F
1
2
3
4
Image of the test mode.
[Note] Higher level 4 characters only. Lower level 4 characters are spaces.
(1)
(2)
(3)
(4)
(5)
[Note] In order to move on to another test after selecting a test (FE/EDC1/EDC2), it is necessary to restart the DVD mechanism in the test mode.
Image of the front end test mode.
(1)
(2)
(3)
(4)
(5)
EJECT
(1)
(2)
(3),(4)
(5)
(6)
(7)
(8)
S curve
measurement
(2)
[Note] If no action is taken for approximately 10 seconds after LD-ON, it will become LO-OFF automatically.
If F close is selected during LD-OFF, it will become an error.
During focus search (S character measurement mode), too, safety regulation applies if LD_OFF is not selected
within 10 seconds. Therefore, even if focus search is selected after LD-ON, it will become LD-OFF after 9 seconds.
In order to F close after focus search (S character measurement mode), set to Power_OFF first then power on again
before F close.
FE test mode
Disc type DVD1
layer
FE offset coefficient
TE offset coefficient
AS offset coefficient
ENV offset coefficient
TG offset coefficient
DBAL coefficient
VIN1 offset cancel value
VIN2 offset cancel value
VIN3 offset cancel value
VIN4 offset cancel value
VIN5 offset cancel value
VIN6 offset cancel value
VIN7 offset cancel value
VIN8 offset cancel value
VIN9 offset cancel value
Power on
F close
F search
1A00 0000
Focus close state
FEMAX level
FEMIN level
ASMAX level
ENVMAX level
FE normalization coefficient
Spindle gain coefficient
TEMAX level indication
TEMIN level indication
CRG+/-
Activates while the key
is being pressed.
1B00 0000 : CRG+
1C00 0000 : CRG-
LD-ON/OFF
When LO-ON : 1100 0000
When LD-OFF : 1000 0000
Power_OFF
Disc type DVD2
layer
Disc type CD
0000 0000
0100 0000
0200 0000
EJECT
Disc type CD-RW
0300 0000
F search STOP
1100 0000
0FFF 0000
1FFF 0000
CRG_HOME
1D00 0000
0X00 0000
Start of the test mode.
TEST
FE test selection
EDC1 test selection
EDC2 test selection
Hereafter, to FE test
mode image.
LD power on time
mode selection
Legend:
… Key operation
CRG_OUTSIDER
1E00 0000
Hereafter, to EDC1
test mode image.
Hereafter, to EDC2
test mode image.
Hereafter, to LD power on
time mode image.
Hereafter, to simple
FE test mode.
Simple FE
test mode
… Operation state
… The content displayed on the DVD mechanism (video only)
8 characters data is sent to the product side (HOST) by UART communication.
1X00 0000
(2)
(1)
(2)
(3),(4)
(8)
(1)
(3),(4)
(5)
(8)
Tracking balance
TBAL coefficient (layer 0)
TBAL coefficient (layer 1)
TE normalization coefficient (layer 0)
TE normalization coefficient (layer 1)
Off track adjustment result
Focus Jump
When L0 layer : 2000 0000
When L1 layer : 2100 0000
CRG+/-
It operates while the key
is being pressed.
2B00 0000 : CRG+
2C00 0000 : CRG-
Power_OFF
Power_OFF
It operates while the key
is being pressed.
3B00 0000 : CRG+
3C00 0000 : CRG-
2x00 0000
2FFF 0000
3000 0000
3FFF 0000
FBAL coefficient (layer 0)
FBAL coefficient (layer 1)
Focus gain coefficient (layer 0)
Focus gain coefficient (layer 1)
Tracking gain coefficient (layer 0)
Tracking gain coefficient (layer 1)
AS normalization adjustment value (layer 0)
AS normalization adjustment value (layer 1)
RF level value
3FFF 0000
Tracking close state
Tracking close
CRG+/-
Legend:
… Key operation
… Operation state
… The content displayed on the DVD mechanism (video only)
8 characters data is sent to the product side (HOST) by UART communication.