60
AVIC-W8400NEX/XNUC
1
2
3
4
A
B
C
D
E
F
1
2
3
4
Before doing "Remote Control Key Test", set the type of steering remote control to be connected in this section.
2. Type Setting
Select type by [VOLUME] button.
Make settings for Type selected by [ MODE] button.
The voltage value of System uCom 165 pin (WIRED1), 164 pin (WIRED2) are displayed.
The range of the voltage value is 0.000 to 3.300 [V].
3. Learning Wired Remote Control Test
Change the setting of WREMCONT1, WREMCONT2 to [Hi,Lo] [Hi,Hi] [Lo,Hi] [Lo,Lo]
Use [ MODE] button to switch between WREMONT1 and WREMONT2.
Terminal name
WREMCONT1
WREMCONT2
Initial value
Hi
Lo
*Cause of error
Communication between microcomputer and SOC failed
Learning type steering remote control is not compatible in this model
Details of Error Code
1
2
Unknown the current type
Fail to change type