Black plate (67,1)
Connecting the system
FUSE
Secure the RGB cable with
the 11 mm (.4 in) screw
The navigation unit
Where applicable, secure the cable to
the AV receiver using an 11 mm (.4 in)
screw (supplied).
Insert one end of the RGB cable into the “DATA BUS”
slot on the side of this product and secure it with an
11 mm (.4 in) screw (supplied). Connect the other
end of the cable to RGB IN input on the back of your
Pioneer AV receiver.
TMC antenna
(supplied)
Attach the GPS antenna to
the “GPS ANTENNA” jack
on the side of this product.
GPS antenna (supplied)
TMC antenna IF
AV receiver
RGB cable (supplied)
Yellow (B+)
To the terminal that the power is always supplied
regardless of the ignition switch position.
Black (GND)
To vehicle (metal) body.
Power cord (supplied)
Fuse (3 A, 250 V)
Affix the double-sided tape (supplied)
on the surface as level as possible
where the GPS antenna faces the
window. Place the GPS antenna on
the double-sided tape.
2.65 m (8 ft. 8 in.)
3 m (9 ft. 10 in.)
2 m (6 ft. 7 in.)
<127075005636>67
Chapter
13
Installation
Содержание AVIC-U260
Страница 1: ...Owner s Manual ADD ON NAVIGATION SYSTEM AVIC U260 ...
Страница 9: ...Chapter 02 Introduction ...