Pioneer AVIC-D2, Руководство по эксплуатации

Страница: 103 / 134

101
Chapter
8
Cu
st
om
izing t
h
e Audio Sour
ce S
etting
AV
SUB W , you can connect a rear speaker lead
directly to a subwoofer without using an auxiliary
amp.
Initially, navigation system is set for rear full-
range speaker connection (
REAR SP FULL ).
When rear output is connected to full range
speakers (when
REAR SP FULL is selected),
you can connect the RCA subwoofer output to a
subwoofer. In this case, you can select whether
to use the subwoofer controller’s (low pass filter,
phase) built-in
PREOUT SUB W or the auxiliary
PREOUT FULL .
1
Touch “REAR SP” in the INITIAL menu.
2
Touch “REAR SP” to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select
FULL .
When a subwoofer is connected to the rear
output, select
SUB W .
❒ When the rear output setting is SUB W ,
you cannot change the subwoofer control-
ler.
3
Touch “PREOUT” to switch the sub-
woofer output or non fading output.
❒ Even if you change this setting, there is no
output unless you turn “
NON FADING ” or
“ SUB WOOFER ” in the AUDIO menu
“ ON ”.
➲ Using non fading output ➞ Page 99
➲ Using subwoofer output ➞ Page 99
❒ If you change the subwoofer controller
(
REAR SP ), the subwoofer output ( SUB
WOOFER ) and non fading output ( NON
FADING ) in the AUDIO menu return to
the factory settings.
❒ Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.
Switching the muting/attenua-
tion
When the navigation outputs the guidance voice,
or when a mute signal has been received from
the yellow/black lead connected to the navigation
system (e.g. using a cellular telephone), the
audio volume is muted or attenuated.
This function is activated in the following condi-
tion:
— When “ MUTE ” or “ ATT ” is selected in this
setting.
— When “ On ” is selected in “ Voice Guid-
ance ” on “ Mute Settings ”.
➲ Mute Settings ➞ Page 63
1
Touch “TEL/GUIDE” in the INITIAL
menu.
Each touch of the “ TEL/GUIDE ” changes the
settings as follows:
•
MUTE — Muting
• ATT — Attenuation
• NORMAL — Volume does not change
❒
The sound is turned off, “ MUTE ” is dis-
played and no audio adjustments are pos-
sible.
❒
The sound is attenuated, “ ATT ” is dis-
played and no audio adjustments, except
volume control, are possible.
❒ Operation returns to normal when the
phone connection (the mute signal on the
yellow/black lead) is ended or when the
navigation guidance is ended.
❒ Even when you receive a phone call, navi-
gation voice guidance cannot be attenu-
ated or muted. Use the
Volume to control
the navigation voice guidance volume.
Initia
l Settings