Resetting the
microprocessor
By pressing
RESET
, you can reset the micro-
processor to its initial settings without chan-
ging the bookmark information.
The microprocessor must be reset in the fol-
lowing situations:
!
Before using this unit for the first time after
installation
!
If the unit fails to operate properly
!
When strange or incorrect messages ap-
pear on the display
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other
pointed instrument.
Refer to
What
’
s what
on page 9.
Note
Switch your engine ON or set the ignition switch
to ACC ON before pressing
RESET
in the follow-
ing situations:
!
After completing connections
!
When erasing all stored settings
!
When resetting the unit to its initial (factory)
settings
En
73
Section
22
Other
functions
Other functions