Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1
Press the home button to switch to the
home display.
2
Touch the system key to open the sys-
tem menu.
3
Touch Mute/ATT until the desired set-
ting appears.
Touch
Mute/ATT
until the desired setting ap-
pears in the display.
!
Mute
–
Muting
!
ATT
–
20dB
–
Attenuation (
ATT
–
20dB
has a
stronger effect than
ATT
–
10dB
)
!
ATT
–
10dB
–
Attenuation
!
Off
–
Turns the sound muting/attenuation
off
Notes
!
When
Mute
is displayed, the sound is turned
off and no audio adjustments can be made.
!
When
ATT
is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
!
Operation returns to normal when the phone
connection is ended.
Setting the rear output and
subwoofer controller
This unit
’
s rear output (rear speaker leads out-
put and RCA rear output) can be used for full-
range speaker (
Full
) or subwoofer
(
Subwoofer
) connection. If you switch the
rear output setting to
Subwoofer
, you can
connect a rear speaker lead directly to a sub-
woofer without using an auxiliary amp.
Initially, the unit is set for a rear full-range
speaker connection (
Full
).
1
Turn the source off.
Refer to
Turning the source ON/OFF
on page
10.
2
Press the home button to switch to the
home display.
3
Touch the system key to open the sys-
tem menu.
4
Touch Rear Speaker on the system
menu to switch the subwoofer output or
full-range speaker.
#
When no subwoofer is connected to the rear
output, select
Full
(full-range speaker).
#
When a subwoofer is connected to the rear
output, select
Subwoofer
(subwoofer).
Notes
!
Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to
Using subwoofer output
on
page 54).
!
Both rear speaker lead outputs and RCA rear
output are switched simultaneously in this
setting.
Using the keyboard
Keyboard
is available only in Advanced App
Mode.
Refer to
Setting the Keyboard
on page 36.
Setting the ever scroll
When ever scroll is set to
On
, recorded text in-
formation scrolls continuously in the display.
Set to
Off
if you prefer the information to
scroll just once.
1
Press the home button to switch to the
home display.
En
62
Section
18
System settings