06
Section
Built-in CD Player
59
En
English
Selecting tracks from the
track title list
The track title list lets you see the list of track
titles on a CD TEXT disc and select one of
them for playback.
1
Press FUNC and then press T.LIST to se-
lect the track title list mode.
2
Press NEXT until the desired track title
appears.
3
Press the corresponding number but-
ton to select the desired track title.
That selection will begin to play.
Notes
• You can also use
,
and
(or
NAVI/OK
) to
select and play the desired track title.
• Only when playing a CD TEXT disc on the
built-in CD player or a CD TEXT compatible
multi-CD player, you can switch to this
mode.
Pausing CD playback
Pause lets you temporarily stop playback of
the CD.
1
Press FUNC and then press PAUSE to
select the pause mode.
2
Press PAUSE to turn the pause on.
The light illuminates. Play of the current track
pauses.
To turn the pause off, press
PAUSE
again.
Notes
• You can also turn pause on or off by pressing
PAUSE
in the following display.
• When the pause mode is exited while pause
is on, “
PAUSE
” is displayed in the basic dis-
play.
Using compression and
BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
has a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1
Press FUNC and then press NEXT.
2
Press COMP to select COMP mode.
