Navigation
En
02
Section
38
Avoiding a traffic jam
This function allows you to block the ap-
proaching route sections as from the next
junction and calculate a bypass route when a
traffic jam or road block is directly ahead.
Entering the length of the
bypass
1
Press
.
2
Select the length of the traffic jam and
then press NAVI/OK.
(inversely) is displayed and the route is
recalculated.
Delete bypass
1
Press .
2
To delete a bypass, press NAVI/OK
within 8 seconds.
The route is recalculated and route guidance
begins.
To continue route guidance with a bypass,
press
BACK
.
Stopover
This function enables a stopover to be entered
when route guidance is active.
Entering a stopover
1
Press .
2
Select the way to enter a stopover.
“
LAST DESTINATIONS
” and “
DEST. MEMO-
RY
” appears only when information is stored.
LAST DESTINATIONS
:
specifies the location
you have visited as a stopover. Refer to
Selecting
a destination from the memory
on page 26.
DESTINATION
:
enter the stopover informa-
tion from the start. Refer to
Entering the destina-
tion information
on page 23.
P.O.I.
:
specifies a special destination as a
stopover. Refer to
Selecting a special destination
as destination
on page 25.
DEST. MEMORY
:
specifies the location
stored in the destination memory as a stopover.
Refer to
Selecting a destination from the memory
on page 26.
3
Specifying the location you want to
register as a stopover by performing the
same operation as for the destination.
Refer to
Entering the destination information
on page 23.
