7
En
English
Step 2 Connecting devices and this unit
Names of Parts
For details, see the Operating Instructions of this unit.
USB
terminal
MASTER
output terminals
MIC
input terminal (1/4” TS jack) *Supported unbalanced input only
MIC LEVEL
control *When not using a microphone, turn the volume to the minimum level.
TEMPO
slider
KEY LOCK
button
FX LEVEL
control
FX ON/OFF
button
DECK
switching
button
Jog dial
Pad mode select button
Performance pad
SHIFT
button
SYNC
button
CUE
button
PLAY/PAUSE
f
button
LOOP
beat change button
AUTO LOOP
button
VINYL
button
Deck 1
(left)
Deck 2
(right)
LOAD
button
TRIM
control
Rotary selector
EQ
(
HI
/
MID
/
LOW
) controls
MASTER LEVEL
control
HEADPHONE LEVEL
control
FILTER
control
HEADPHONES
CUE MASTER/1/2
select button
CHANNEL LEVEL
indicator
Crossfader
Channel fader
PHONES
output terminal
(3.5 mm stereo mini jack)
Connecting speakers with a built-in
amplifier to the unit with an audio
cable (RCA)
Connect speakers with a built-in amplifier, powered
speakers, etc. to the [MASTER] output terminals of this
unit.
•
An audio cable (RCA) is not included with this unit. Please provide it
yourself separately.
Speakers with a built-in amplifier,
powered speakers, etc.
Earphones/headphones
•
Connect earphones/headphones to the [
PHONES
] output terminal.
For details on connecting the input/output terminals, see the
Operating Instructions of this unit.
•
Turn the volume of the device(s) (speakers with a built-in amplifier,
powered speakers, etc.) connected to the [
MASTER
] output terminals
to an appropriate level. Note that the output sound may be loud if the
volume is set too high.
Connecting your computer to the
unit
1 Connect your computer to the unit via a USB cable.
Make a direct connection with the supplied USB cable for optimum
performance. A USB hub cannot be used.
USB cable (supplied)
Computer
2 Turn on your computer.
3 Turn on the device(s) (speakers with a built-in
amplifier, powered speakers, etc.) connected to the
output terminal.
