Pinter MANOCOMB-IP65, Руководство по эксплуатации

Страница: 50 / 56

MANOCOMB®-IP65 Operating Instructions
7e. pneumatic connection 7f. pneumatic data
The MANOCOMB pressure switch is equipped with 1 or 2 pneumatic limit swit-
ches (3/2-way valves).
Connect the supply air to the inlet 1 (for 1K and 2K versions) as well as the
control air a to outlet 2 (control air b to outlet 4 - only 2K version).
All connections are located at the bottom of the MANOCOMB pressure switch. The switching function is guaranteed if the supply air pressure is at least 2 bar
and a maximum of 8 bar. The MANOCOMB pressure switch is calibrated at 4
bar supply air by factory default.
Set your supply air to 4 bar +/- 0.1 bar for optimum function values in terms of
switching behavior and switching or switch-back accuracy.
P process connection
1 supply air inlet
2 control air outlet a
4 control air outlet b 1
Remarks
1 control air outlet b only for 2K models
description
3/2-way poppet valve, open centre between actuations, servo
controlled
switching function normally open or normally closed
supply air pressure 2 - 8 bar (4 bar recommended)
supply media
5 µm, lubricated or filtered non-lubricated compressed air or
any other according to ISO-VG 10
consumption approx. 0,7 l/min