Pinter MANOCOMB-IP65, Руководство по эксплуатации

Страница: 34 / 56

MANOCOMB®-IP65 Operating Instructions
5a. Part number codes MANOCOMB-IP65 (most common options)
codes for most common options
part number structure
M 0 a b c d - e (f) - g h i
a / approvals standard version (CE marking) 0
a / approvals SIL, TÜV, PED approval 1
b / switching function 1K (1x SPDT) 0
b / switching function 1KA (1x SPDT, 1x integrated pressure gauge) 1
b / switching function 2K (2x SPDT) 2
b / switching function 2KA (2x SPDT, 1x integrated pressure gauge) 3
b / switching function 2KP (2x SPDT; seperate measuring systems) 4
b / switching function 2K2AP (2x SPDT; seperate measuring systems with 1x integrated pressure gauge each) 5
b / switching function 1KPDi (1x SPDT, differential pressure) 7
b / switching function 1K2APDi (1x SPDT, differential pressure, 1x integrated pressure gauge for each + & - pressure inlet) 8
c / material wetted parts brass, FKM 1
c / material wetted parts stainless steel 1.4571 (AISI 316Ti) / 1.4404 (AISI 316L), FKM 2
c / material wetted parts stainless steel 1.4571 (AISI 316Ti) / 1.4404 (AISI 316L), welded/no gasket G
d / switching contact Standard micro switch A
d / switching contact MG (micro switch with gold-plated contacts) B
d / switching contact MH (for higher switch load at DC) C
d / switching contact CS (multi purpose micro switch) H
d / switching contact CH (for high switch load) G
d / switching contact I-N (inductive contact, NAMUR NC) J
d / switching contact I-SN (inductive contact, NAMUR NC, safety function) K
d / switching contact I-S1N (inductive contact, NAMUR NO, safety function) W