Pinnacle Systems Deko1000, Техническое руководство и инструкция по обслуживанию

Страница: 87 / 102

Chapter 5: System Maintenance
Deko1000 & Deko550 Technical Reference And Service Guide
87
5. Reboot the workstation (it may automatically reboot coming out of the BIOS).
You will see a prompt “Restoring will overwrite your system partition. Are you sure?
Select “Yes.” The Drive Image Restore program will take approximately 6 minutes to
complete. After the program has finished, the root directory for Drive A (shown as A:\>)
will be displayed.
6. Remove the “Drive Image Restore DVD” from the DVD drive and reboot the worksta-
tion.
A welcome screen will appear after the reboot.
7. A prompt will be displayed stating “The Product ID You Entered Is Not Valid.”
Click “OK” until the prompt is no longer displayed.
8. Enter the 25 characters that make up the product key number for the workstation.
The alpha-numeric characters that make the product key can be found on the front panel of
the workstation. If the Deko1000 or Deko550 front panel cover is on the front of the
workstation, remove the panel cover. The product key sticker is glued onto the front panel of
the workstation. Type the product key onto the boxes displayed on the screen, then click
“Next.” A screen prompting for the name of the computer should appear.
9. Enter a name for the computer and click “Next.”
Only the characters A-Z, the numbers 0-9, and hyphens can be used. If the workstation is
connected to a network, then name given to the machine (and the description if one is given)
will appear on the network. When “Ok” is clicked, the Administrator password screen will
appear.
10.Select the Network Settings for the workstation.
The choices are “Typical Settings” and Custom Settings.” For most situations, the “Typical
Settings” selection will fulfill most needs. Contact your System Administration if you’re
not sure which to choose for the workstation.
11. Do not enter an Administrator password. Click “Next.”
A screen asking for the name of the workstation users will appear.
12. Select the “Workstation Computer Domain” for the workstation and click “Next.”
Contact your System Administration if you’re not sure if the workstation is to be part of a
domain. After “Next” is clicked, the software will load and the system will reboot.
13. Click “Next” on the initial screen of the Network Identification Wizard program.
The “Network Identification Wizard” program automatically launches after the system
reboots. After next is clicked a “Users Of This Computer” screen will appear.
14. Click “Next” on the “Users Of This Computer” screen.
Use the default settings. Do not type in a password for the password field.