Captain 6 Installation Guide
14
2.7.2.1
Recording a message
Diagram 9.
VU-20(U) module
1.
Switch the module’s REC/PLAY button to the REC position (down).
11.
Press and hold the M1 or M2 buttons (the red LED should illuminate) wait one second (for
the recording to start) and record your message. Speak up loudly and clear, 20 cm away
from the module. The message should not exceed 20 seconds.
12.
When you finish recording, release the button and switch the REC/PLAY button back to “PLAY”.
13.
Test your recording by triggering an alarm.
2.7.3
Connecting the GSM-200
Diagram 10.
GSM-200 wiring
The GSM-200 is PIMA’s cellular module.
To connect GSM-200:
Connect the GSM-200 YELLOW wire to AUDIO IN;
Connect the ORANGE wire to AUDIO OUT;
Connect the serial wire braid between the module and the TRANSMITTER terminal
on the control panel.
VU
-
20 U
Audio
+
12 V
GND
M1
M2
PLAY
REC
LED
M1
M2
CONT
Orange
Yellow
OUT
IN
GSM-200
O UT
LINE
TELEPHONE
S ET
AUDIO
IN
-
EGND
TRANSMITTER
TRANSMITTER
BATT
AUDIO
