Commissioning
Operating Manual PNOZ m ES 14DO
1004299-EN-02
13
6
Commissioning
6.1
General wiring guidelines
The wiring is defined in the circuit diagram of the PNOZmulti Configurator.
Please note:
}
}
The position of the expansion module is specified in the Hardware configuration of the
PNOZmulti Configurator.
}
Use copper wire that can withstand 75° C.
}
The supply voltage of the semiconductor outputs and the supply voltage of the system
are galvanically isolated from each other.
}
Protect the supply voltage as follows:
–
Circuit breaker, characteristic C - 10 A
or
–
Blow-out fuse, slow, 10 A
6.2
Connection
Supply voltage
DC
Connection example
Single output
o1
L-
Two outputs parallel
o2
L-
o3
