background image

Introduction

Operating Manual PNOZ m ES 14DO
1004299-EN-02

4

1

Introduction

1.1

Validity of documentation

This documentation is valid for the product PNOZ m ES 14DO from Version HW:01,
FW:01.00 .

This operating manual explains the function and operation, describes the installation and
provides guidelines on how to connect the product.

1.2

Using the documentation

This document is intended for instruction. Only install and commission the product if you
have read and understood this document. The document should be retained for future ref-
erence.

1.3

Definition of symbols

Information that is particularly important is identified as follows:

DANGER!

This warning must be heeded! It warns of a hazardous situation that poses
an immediate threat of serious injury and death and indicates preventive
measures that can be taken.

WARNING!

This warning must be heeded! It warns of a hazardous situation that could
lead to serious injury and death and indicates preventive measures that can
be taken.

CAUTION!

This refers to a hazard that can lead to a less serious or minor injury plus
material damage, and also provides information on preventive measures
that can be taken.

NOTICE

This describes a situation in which the product or devices could be dam-
aged and also provides information on preventive measures that can be
taken. It also highlights areas within the text that are of particular import-
ance.

Содержание PNOZ m ES 14DO




















Отзывы: