Commissioning
Operating Manual PNOZ m B1
1003790-EN-02
| 22
6.4
Use USB memory
Multiple projects can be stored on the USB memory that is plugged into the device. One of
these can be activated and executed on the base unit.
Please note the following when using the USB memory:
}
The USB memory must always be plugged in during operation.
}
In order to copy projects, for example, the USB memory can be removed and plugged
into the PC or into another base unit PNOZ m B1.
}
Only Pilz USB memories may be used!
}
Due to mechanical requirements, the USB memory is plugged firmly into the device and
so may be difficult to remove.
If this is the case, use an appropriate tool, such as a screwdriver, to carefully extract the
USB memory (see illustration).
}
To use the USB memory, insert the USB memory into the slot, applying light pressure.
Make sure that the USB memory is inserted right up to the plastic handle (see illustra-
tion).
6.5
Load project from PNOZmulti Configurator
Projects can be transferred from the PNOZmulti Confgurator to the USB memory. Several
projects may be stored on the USB memory, A project can be activated directly. This can
be performed in the Project Manager of the PNOZmulti Configurator (see online help for the
PNOZmulti Configurator).
Procedure:
}
Connect the computer containing the PNOZmulti Configurator to the base unit PNOZ m
B1 via the Ethernet interface.
}
Make sure that the USB memory is plugged into the base unit PNOZ m B1.
}
Switch on the supply voltage.
