Security
Operating instructions PMCprimo C
1002242-EN-03
13
It is the company’s responsibility only to employ personnel who:
}
Are familiar with the basic regulations concerning health and safety / accident preven-
tion
}
Have read and understood the information provided in this description under "Safety"
}
And have a good knowledge of the generic and specialist standards applicable to the
specific application.
3.2.2
Warranty and liability
All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended
}
Damage can be attributed to not having followed the guidelines in the manual
}
Operating personnel are not suitably qualified
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.2.3
Disposal
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
3.3
Standards
To use the device correctly you will need to have a good knowledge of the relevant stand-
ards and directives. The following standards are relevant:
}
EN 61131-1: Programmable controllers – Part 1: General information
}
EN 61131-2: Programmable controllers – Part 2: Equipment requirements and tests
}
EN 61131-3: Programmable controllers – Part 3: Programming languages
Please note this is not an exhaustive list of safety standards and directives.
Where standards are undated, the 2010-12 latest editions shall apply.