5.5.2. Control panel ARG 230, ARG 230 Plus, ARG 240, ARG 240 Plus, ARG 290 Plus
Basic functions
OIL DAMPER CONTROL VALVE
TOTAL STOP
START
STOP
MAIN SWITCH
SPEEDS SWITCH
1 - 40 m/min
2 - 80 m/min
SPEED SWITCH
Green button
- starts the main engine and the coolant pump.
When starting the band drive the saw arm must be raised above the switching level of the
down position end switch otherwise the band drive will NOT be started.
Red button
- stops the main engine and coolant pump.
CAUTION : DANGER OF INJURY - after switching the button the arm (with the band)
stills moving down.
MAIN SWITCH
TOTAL STOP
Before starting the band drive make always sure that the band
is NOT in contact with the workpiece.
BAND SAW START - STOP
CAUTION : Speeds may be changed only when the engine
is stopped (saw band is not running)
Cutting speeds can be changed by a switch placed on the control panel on the machine base.
Emergency stop of the main engine and coolant pump. The
machine restart may be done only after manual unblock of the total
stop button (BY PULL). CAUTION : DANGER OF INJURY - after
switching the button the arm (with the band) stills moving down.
