PIKA B801 REcharge, Руководство по эксплуатации, Страница: 26 / 35

23
(available from electronic component distributors) will be compatible. For alternate antenna
suggestions contact Pika Energy.
8.2 Configuring your Wi-Fi Connection
This section will describe how to connect the B801 to your Wi-Fi network.
The B801 Wi-Fi connection is IEEE 802.11G compliant and
connects to 802.11b/g/n routers with WEP, WPA-PSK, and
WPA2-PSK security protocols.
Note: While WEP encryption is
nominally supported, it has been problematic on wireless
networks running older WEP enabled hardware.
Step 1: Navigate to the Wi-Fi information page and press the
center button to open the menu.
Step 2: Choose whether you want the B801 to scan for the Wi-Fi networks or enter your Wi-Fi network
parameters manually. For most networks using DHCP, simply scan, enter the network password and
connect.
If manual configuration is desired, selected the “Advanced” option, select “Manual” and enter
an IP address, Subnet Mask, DNS and Gateway. For some institutions, it is necessary to create an IP
address reservation before connecting to the network. Contact your network administration for
information on how to reserve an IP address. Enter advanced configuration information (if required)
before connecting to the network.
8.2.1 Scan-based network setup
(Scan) Step 3: If you choose “Scan”, the B801
will scan for networks and display the results
with indicators for signal strength and network
security. Use the
UP and DOWN arrows to
select your network. Press LEFT to cancel the
Wi-Fi configuration process. Press CENTER to
select the highlighted network. The B801 will
then ask you for your Wi-Fi network password if
your network is secured.