PIKA B801 REcharge, Руководство по эксплуатации, Страница: 11 / 35

8
5 Designing a REbus ™ System
Your trained and qualified installer will work with the Pika Energy technical support team to design the
right system for your site. Please consult with Pika Energy sales department at (207) 887-9105 or on the
web at
http://www.pika-energy.com to find an installer near you.
The Pika Energy product system is designed from the ground up for unmatched flexibility. First and
foremost, the B801 Charge controller accepts input from any combination of REbus
™ -compatible
sources. In fact, the B801 supports up to 32 devices on the REbus ™ Microgrid network, and the
automatic power management capability of REbus ™ ensures that excess input power from renewable
sources such as the Pika T701 Wind Turbine or Pika S2001 PV Link will be throttled back to prevent
over-charging of the batteries. As of publication, Pika Energy offers the following REbus
™ products in
addition to the B801 Charge Controller:
x
T701 Wind Turbine
x
S2001 PV Link
x
X3001 Inverter
x
REport Data Monitor
Check the Pika Energy website at http://www.pika-energy.com for the latest selection of REbus™ -
compatible product offerings.
6. User Interface
6.1 Overview of User Interface
The B801 Charge Controller user interface is accessible via the LCD on the front cover. It is designed to
provide basic information such as power, energy and battery voltage. Adjustable setpoints for the B801
and attached REbus
TM
devices can be changed from the LCD screen as well.
6.2 LED Displays
The B801 user interface is equipped with three LEDs to quickly offer information about the status of the
charge controller and other REbus
TM
devices.
6.2.1 Multicolor “REbus™” LED
This green/yellow/red LED indicates the status of the REbus™ microg rid and attached devices. When
solid green, all devices are functioning normally and are generating power. When solid yellow, devices
are functioning normally but there is no power input from the REbus™ microgrid . When red, one or
more of the REbus
TM
devices are in an error state and require attention before operation will continue.
A red light could also indicate a fault with the REbus™ Microgrid itself (e.g. a ground fault). See the LCD
Display for more information about the specific fault that has been detected.
6.2.2 Multicolor “Battery” LED
This green/yellow/red LED indicates the status of the B801 itself. If the B801 is Disabled (or powered
OFF), the Battery LED will be OFF. The Battery LED will only be illuminated if the B801 has been Enabled.