PIETRO FIORENTINI Dival 600, Руководство пользователя

Страница: 107 / 156

107
DIV
AL 600
Use, maintenance and warning instructions
MEDIUM PRESSURE REGULATOR | MAINTENANCE AND FUNCTIONAL CHECKS | REV. A
EN
Step Action
1
1
Unscrew and remove the cap (354).
2
2
Remove the O-ring (353) and replace it, taking care to lubricate it with synthetic grease.
NOTICE!
Before inserting the replacement O-ring, clean the retaining slots with a cleaning solution.
3
3
Unscrew and remove the ring nut (351) together with the washer (352).
NOTICE!
Turn the ring nut anti-clockwise.
4
4
Remove the regulation spring (328).
5
5
Unscrew and remove the screws (103) securing the control head (A) to the body (C).
6
6
Remove the control head (A) together with the balancing block (B).
7
7
Separate the balancing block (B) from the control head (A).
NOTICE!
Follow the direction of the arrow on the lower cover (310).
8
8
Unscrew and remove the nuts (361).
9
9
Undo and remove the screws (360).
10
10
Remove the upper cover (340) from the lower cover (310).
11
11
Unscrew and remove the locking nut (332).
12
12
Pull out the spring (331) of the relief valve.
13
13
Pull the diaphragm support assembly (321, 322, 323, 324) off the rod (302).
14
14
Remove the O-ring (303) and replace it, taking care to lubricate it with synthetic grease.
NOTICE!
Before inserting the replacement O-ring, clean the retaining slots with a cleaning solution.
15
15
Unscrew and remove the locking nut (324).
NOTICE!
During this phase, keep the diaphragm support (323) still.
16
16
Remove the diaphragm protection disc (322).
17
17
Remove and replace the main diaphragm (321).
18
18
Fit the diaphragm protection disc (322).
19
19
Insert and secure the locking nut (324), according to the tightening torques:
• “Tab. 9.57”
NOTICE!
During this phase, keep the diaphragm support (323) still.
20
20
Position the diaphragm support assembly (321, 322, 323, 324, 390) in the rod (302).
21
21
Insert the spring (331) of the relief valve.
22
22
Insert and fix the nut (332) according to the following tightening torques:
• “Tab. 9.57”
23
Place the upper cover (340) on the lower cover (310).
NOTICE!
Follow the orientation of the anti-pumping valve when positioning the cover.