PIETRO FIORENTINI Dival 600, Руководство пользователя

Страница: 62 / 156

62
DIV
AL 600
EN
Use, maintenance and warning instructions
MEDIUM PRESSURE REGULATOR | INSTALLATION | REV. A
If there is a multiple sensing line, connect the equipment connections as shown below:
• 1 and 2 to the discharge outlet of the regulator control head and of the regulator in monitor function (when present);
• 3 and 4 free sensing lines;
• 5 and 6 to the sensing lines of the slam-shut valve (when present).
NOTICE!
If there is a multiple sensing line, it is not recommended to place shut-off valves on sensing lines.
In any case, follow the regulations in force in the place of installation and use of the equipment.
5
3
1 2
4
6 5
3
1
2
4
6
Fig. 6.15. Equipment connections
6.6 - POST-INSTALLATION AND PRE-COMMISSIONING CHECKS
When the equipment is operating, make sure that all connections are:
• properly secured/tightened to prevent any leakage during commissioning;
• connected correctly.