08/12
|
|
08/12
21
20
SpeCIFICATIoNS
TeCHNICAL DATA
Device designation
PIEPS iPROBE ONE
System
Electronic avalanche probe with high
quality carbon and aluminum tubes
Receiving frequency
457 kHz (EN 300718)
Power supply
1 battery, Alkaline (AA), LR06, 1.5V
Battery lifetime
150 h (Check A1)
Approaching range
2 m
Range target hit
0 – approx. 50 cm
Temperature range
-20°C to +45°C
WArrANTY CoNDITIoNS
• The device is guaranteed by the manufacturer against defects in material
and workmanship for a period of 2 years from the date of purchase.
• This warranty does not apply to damage caused by incorrect use, dropping
or dismantling of the device by unauthorized persons.
• Any further warranty or liability for consequential damage is
expressly excluded.
• Warranty claims should be addressed - enclosing the receipt of purchase –
to the relevant sales outlet.
CerTIFICATIoN:
Warning: Any changes or modifications not expressly
approved by the manufacturer, responsible for compliance, could void the
user’s authority to operate this device. Europe: Manufacturer: PIEPS GmbH,
Country of manufacture: Austria, Device type: PIEPS iPROBE ONE; Canada:
IC: 7262a-iproBE01, USa: fCC ID: rEMiproBE01; This device conforms to
Paragraph 15 of the FCC regulations. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device
must accept any interference received, including interference that may cause
undesired operation.
CoNForMITY:
PIEPS GmbH declares hereby, that the product PIEPS iPROBE
ONE fulfills all requirements and regulations of directive 1999/5/EC! The
declaration of conformity can be downloaded at the following source: http://
www.pieps.com/certification
MANUFACTUrer, SALeS & SerVICe
pIEpS GmbH, Parkring 4, 8403 Lebring, Austria
E-mail: [email protected], www.pieps.com
All information supplied
without liability.
11/2011
PIEPS
iproBE oNE
220
260
Weight (incl. battery)
350 g
390 g
Probing length (mechanically)
1,80 m
2,20 m
Probing length total
(mech. + electronic Target range)
max.
3,60 m
max.
4,00 m
SUMMArY ACoUSTIC SIGNALS
SUMMArY LeD-INDICATIoN
permanent acoustic signal (piiiiiiiiiiiep):
During power-on a permanent signal is emitted for one second.
permanent acoustic signal after self-check (piep_piep_piep_...):
iPROBE ONE error
acoustic signal for 3 seconds after self-check (piep_piep_piep_...):
Battery replacement
permanent acoustic signal (tschip__tschip__tschip_...):
no active transmitter nearby
acoustic signal (piep_piep_piep_...):
active transmitter is nearby (approx. 0,5 to 2 m)
permanent acoustic signal (piiiiiiiiiiiep):
active transmitter is nearby (< approx. 50 cm)
5 short Beep-signals (piep-piep-piep-piep-piep_...):
Transmitter with iPROBE ONE Support is deactivated
acoustic signal (prrrrie):
During power-off an acoustic signal is emitted for 3 seconds
Continuous LED-signal:
During power-on both LED-indication lights will show for 1 second
Blinking LED-signal:
active transmitter is nearby (approx. 0,5 to 2 m)
Continuous LED-signal:
active transmitter is nearby (< approx. 50 cm)
De
eN
eS
Fr
IT
CZ
SK
rU
De
eN
eS
Fr
IT
CZ
SK
rU
