PIE 311Plus Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 20

PIE 311Plus Скачать руководство пользователя страница 20

Page 20

Practical Instrument Electronics

82 East Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • [email protected] • www.piecal.com

Warranty

Our equipment is warranted against defective material and workmanship (excluding batteries) for a
period of three years from the date of shipment. Claims under warranty can be made by returning
the equipment prepaid to our factory. The equipment will be repaired, replaced or adjusted at our
option. The liability of Practical Instrument Electronics (PIE) is restricted to that given under our
warranty. No responsibility is accepted for damage, loss or other expense incurred through sale or
use of our equipment. Under no condition shall Practical Instrument Electronics, Inc. be liable for any
special, incidental or consequential damage.

Additional Information

This product is calibrated on equipment traceable to NIST and includes a Certificate of Calibration.

Test Data is available for an additional charge.

Practical Instrument Electronics recommends a calibration interval of one year. Contact your local

representative for recalibration and repair services.

Accessories

Standard Test Leads (Included with calibrator)

Part No. 020-0208

Two black and two red test leads three feet (1 meter) long with a spade lug on one end and a

banana plug on the other end.

Magnetic Hanging Strap

Part No. 020-0236

Optional Ni-MH 1 Hour Charger w/4 Ni-MH AA Batteries

Part No. 020-0103

«
...
18
19
20

Содержание 311Plus





















Отзывы:

Нет отзывов