Picomed ER2AC, Документация

Страница: 8 / 11

ER2AC, ER4AC Page 8.
1 0 Impulse 4 seconds
1 1 Hold
2.4 Recycling
When the IR-receiver shall be recycled to be used by an other user, the following should be
done. If there is any need to file this process, make copies of this page, fill in serialnumber
and make a cross next to each point to be done.
Serialnumber:
Check the IR-receiver for damages.
Clean it.
Make a functional test
1
.
Reprogram the ER x AC IR-receiver so IR-formats and usercodes used by a person
not can be misused in any circumstances. The following settings are
recommended:
Usercode 0.
Channelgroup (Gewa) 0.
Channel 0.
Format New Assistant.
3 Productinformation
Picomed ER2AC and Picomed ER4AC IR-receivers have 2 or 4 channels controlled by
infrared (IR) light. The receivers are developed to control lov-voltage products up to 48 V.
They can also control 230 VAC via external relays. They shall be powered with 12-24
VAC/VDC. They can be programmed to receive ordinary codes or lock codes. They can read
the following IR-formats:
New Assistant, 32 usercodes with 16 channels in each.
New Assistant lockcode, 12 bit.
Gewa Infralink, 4 groups with 16 channels in each.
Gewa Infralink lockcode, old 10 bit.
Gewa Infralink lockcode, new12 bit.
The IR-receiver can be programmed to respond on both New Assistant and Gewa if needed.
ER2AC has 2 channels (relays).
ER4AC has 4 channels (relays).
Each relay output can be individually programmed to on/off, hold or impuls. If the IR-
receiver is programmed to respond on lock-codes it will only work on channel/relay 1.
3.1 Accessories
The IR-receiver is assembled with a printed circuit board inside a plastic box. On the front
there is a keypad foil with keys, product name and a light indicator. The partnumbers are:
Description Picomed partnumber
Infrared receiver 2 channels ER2AC
Infrared receiver 4 channels ER4AC
1
A functional test should be done together with an IR-transmitter. Tip: do it before the IR-receiver is
dismounted. Both the IR-receiver and the IR-transmitter has to be prerogrammed with the same user code and
channel. Ensure that the IR-receiver responds on the receiverd IR-signals.