Picomed ER2AC, Документация

Страница: 6 / 11

ER2AC, ER4AC Page 6.
2.3.3 Programming memory
All settings which are programmed will be stored and they will not be changed during a
power loss. The power supply has to be connected during the programming sequence.
2.3.4 User code and channel - programmed with buttons
PW to use for choosing the user code shall start with " 1 0 0 0". The PW shall be like this:
1
0 0 0 A4 A3 A2 A1 A0 D3 D2 D1 D0
The table beneath shows the usercodes and channels:
Gewa chan-
nel group
Usercode A
4
A
3
A
2
A
1
A
0
0 0 0 0 0 0 0
1 1 0 0 0 0 1
2 2 0 0 0 1 0
3 3 0 0 0 1 1
0 4 0 0 1 0 0
1 5 0 0 1 0 1
2 6 0 0 1 1 0
3 7 0 0 1 1 1
0 8 0 1 0 0 0
1 9 0 1 0 0 1
2 10 0 1 0 1 0
3 11 0 1 0 1 1
0 12 0 1 1 0 0
1 13 0 1 1 0 1
2 14 0 1 1 1 0
3 15 0 1 1 1 1
0 16 1 0 0 0 0
1 17 1 0 0 0 1
2 18 1 0 0 1 0
3 19 1 0 0 1 1
0 20 1 0 1 0 0
1 21 1 0 1 0 1
2 22 1 0 1 1 0
3 23 1 0 1 1 1
0 24 1 1 0 0 0
1 25 1 1 0 0 1
2 26 1 1 0 1 0
3 27 1 1 0 1 1
0 28 1 1 1 0 0
1 29 1 1 1 0 1
2 30 1 1 1 1 0
3 31 1 1 1 1 1
2.3.5 User code and channel - programmed with an IR-remotecontroller
A fast mode programming mode is also available. A preprogrammed IR-remote controller can
be used.