Page 4.8
HIGH DENSITY RELAY MODULES 40-145/146/148
pickering
SECTION 4 - PROGRAMMING GUIDE
USING PICKERING DRIVERS IN LabVIEW
Most Pickering drivers include a LabVIEW wrapper to permit full operation of the Pickering product from the LabVIEW
environment. These wrappers are normally installed to the current LabVIEW folder system during installation of the
Pickering driver.
The process of controlling a Pickering product normally consists of the following steps:
1.
Open a control session on the product
2.
Use functions in the library to operate the product
3.
Close the control session
Following is a simple example of the use of the most common Pickering drivers:
Figure 4.4 - Example Use of Pickering Drivers in LabVIEW
To download LabVIEW examples, please go to:
http://wiki.pickeringtest.net/Using+Piin+LabView
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
