PI U--651 Series, Руководство пользователя

Страница: 23 / 51

5 Installation
U­651 Rotation Stage MP136E Version: 1.3.0 19
Figure 6: U-651: Holes in the base body for M6 screws (white arrows) or M4 screws (black arrows)
Requirements

You have read and understood the general notes on installation (p. 15).

You have provided a suitable underlying surface (see "Dimensions" (p. 42) for the
required position of the holes for the screws).
−
Four M6 or M4 holes are provided with a thread depth of at least 13 mm.
−
The surface flatness is ≤10 µm.
− For applications with large temperature changes: The surface should have the same
thermal expansion properties as the U-651 (e.g., surface made of aluminum).

You have accounted for the space required to route cables without bending and
according to regulations.

The U-651 is not connected to the controller.
Tools and accessories

Mounting accessories in the scope of delivery (p. 10):
− Four M6 screws
− Hex key

Alternative (not in the scope of delivery):
− Four M4 screws of suitable length
− Suitable screwdriver