5 Installation
20
Version: 1.3.0
MP136E
U651 Rotation Stage
Mounting the U651 onto a surface
1.
Align the U-651 on the underlying surface so that the holes selected in the U-651 (see
arrows in the figure) are in line with the corresponding holes in the underlying surface.
2.
Insert four suitable screws into the selected holes in the base body of the U-651.
3.
Tighten each of the four screws with the following torque:
−
M6 screws: 7.1 Nm
−
M4 screws: 2.1 Nm
4.
Check that the U-651 is fixed firmly to the surface.
5.4
Fixing the Load to the U651
NOTICE
Impermissibly high forces and torques!
Impermissibly high forces and torques that are applied to the platform can damage the U-651.
For fixing type and mass of the load, pay attention to the maximum permissible forces
according to the specifications (p. 35).
Avoid tilting torques >0.5 Nm on the platform.
NOTICE
Excessively long screws!
The U-651 could be damaged by screws inserted too deeply.
Pay attention to the depth of the mounting holes in the platform (p. 42).
Use screws of the correct length for the respective mounting holes only.
