PI M-230 Series, Руководство пользователя, Страница: 38 / 47

10 Technical Data
34 Version: 1.2 MP102E M-230 Linear Actuators
M-230.10 / M-230.25 M-230.10S / M-230.25S Unit Tolerance
Drive properties M-230.10 / M-230.25 M-230.10S / M-230.25S Unit Tolerance
Motor type DC gear motor 2-phase stepper motor
(1)
Operating voltage 0 to ±12 24 V
Motor power 1.78 - W nominal
Reference and limit switches Hall effect Hall effect
Miscellaneous M-230.10 / M-230.25 M-230.10S / M-230.25S Unit Tolerance
Operating temperature range -20 to 65 -20 to 65 °C
Material Anodized aluminum,
chrome steel, brass Anodized aluminum,
chrome steel, brass
Mass 0.3 / 0.35 0.3 / 0.35 kg ±5 %
Cable length 0.5 0.5 m ±10 mm
Connector D-sub 15 (m), incl.
encoder driver D-sub 15 (m)
Recommended
controllers/drivers C-863
C-884
C-663
(1) Max. 0.25 A/phase, 24 full steps/rev., motor resolution with C-663 stepper motor controller.
(2) At a velocity to 1 mm/s.
10.1.2 Ambient Conditions and Classifications
The following ambient conditions and classifications must be observed for the M-230:
Area of application For indoor use only
Maximum altitude 2000 m
Relative humidity Highest relative humidity 80% for temperatures up to 31°C
Decreasing linearly to 50% relative humidity at 40°C
Storage temperature 0°C to 80°C
Transport temperature 0°C to 80°C
Supply fluctuations Not more than ±10% of the nominal voltage
Degree of pollution 2
Degree of protection
according to IEC 60529 IP40