5 Installation
L-406 Compact Linear Stage
MP150E
Version: 1.1.0
25
3.
Fix the L-406 to the mounting hole made accessible on the lower L-406: Tighten the
screw in the mounting hole completely.
4.
Repeat steps 2 and 3 for the other mounting holes required in the base body of the
upper positioner.
5.
Check that the upper positioner is firmly seated.
5.5.3
Setting Up a Z System
NOTICE
Excessively long screws!
Screws and locating pins inserted too deeply can damage the lower positioner.
Pay attention to the depth of the mounting holes in the motion platform (p. 46) of the
lower positioner.
Only use screws and locating pins of the correct length for the respective mounting holes.
Designations in these instructions:
Lower positioner
: X axis in an XZ combination; Y axis in an XYZ combination. The
positioner that the upper positioner is mounted on with an adapter bracket.
Upper positioner
:
Forms the Z axis of the multi-axis system, is mounted in a vertical
alignment to the lower positioner with an adapter bracket.
