5 Installation
18
Version: 1.3
MP149E
L-220 Linear Actuator
5.5
Changing the Tip
NOTICE
Damage of the mechanics from torques at the tip
Avoid generation of torques when mounting or changing the tip.
Requirements
You have read and understood the general notes on installation (p. 13).
You have made the L-220 accessible for changing the tip.
The pusher has been moved out so that you can easily reach the tip.
In the delivery state, the pusher is moved out.
Tools and accessories
Supplied tip
Open-end wrench AF 7
Open-end wrench AF 8
Figure 6: Removing the tip
1
Wrench flat of the tip
2
Wrench flat of the linear actuator
Removing and changing the tip
1.
Position an AF 7 open-end wrench on the wrench flat of the linear actuator.
2.
Position an AF 8 open-end wrench on the wrench flats of the tightened tip.
3.
Screw the tip out of pusher with the AF 8 open-end wrench.
4.
Mounting the selected tip (p. 16).