5 Installation
14
Version: 1.3
MP149E
L-220 Linear Actuator
−
The dimensions of the mounting are adapted to the dimensions of the actuator (see
above figures and dimensions (p. 32)).
−
The intended motions of the pusher and the load must not be inhibited by the
dimensions of the installation environment.
Take into account the following specifications as well when planning the application
and installing the actuator:
−
Dimensions of the tip selected (see Dimensions (p. 32))
−
Travel range: (see data table (p. 29))
−
Space requirements for a kink-free and proper guiding of the connecting cable and
additional motor cables
−
Length of the connection cable and the motor cable
If the limit switches of the actuator cannot be reached with the planned minimum and
maximum displacements: Make sure that the actuator and the load
only move within
the planned range
. Suitable measures:
−
Corresponding programming of the controller
−
Emergency off switch
−
Automatic shutdown systems
Avoid or label danger areas that result from the installation of the actuator and from
use, in accordance with the legal regulations (e.g. risk of crushing in the case of heavy
moving loads, fast actuator motions and/or high drive torques).
The complete dimensions of the actuator and relevant individual parts can be found in the
figures in the section Dimensions (p. 32).