User Manual
F712T0002, valid for F-712.MA1 and F-712.MA2
Mma, BRo, 12/6/2019
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Page 23 / 45
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email
3.
Place the fiber holder onto the metal cap or (if the metal cap has been removed) onto
the drive component so that the relevant mounting holes overlap.
Figure 12: Here: Placing the fiber holder onto the drive component.
4.
Mount the fiber holder using suitable M2 screws:
−
Do
not
exceed a torque of
0.4 Nm
.
−
Do
not
exceed the maximum screw-in depth:
2.5 mm if the fiber holder is affixed to the metal cap (see also p. 41)
2 mm if the metal cap has been removed in step 4 (see also p. 42)
Figure 13: Here: Mounting the fiber holder directly onto the drive component.
