phytron phyMOTION I4XM01.1, Перевод оригинального руководства

Страница: 11 / 25

phytron
11 MA 1279- A003 EN
4.3 Features
Performance Characteristics
Indexer 1, 2, 3 and 4 axes stepper motor indexer
Superior controller Modular phy MOTION
TM
controller
Supply voltage 24 V
DC
I/0 supply voltage
5 V
DC
internal
Current consumption
(max.) 250 mA (5 V
DC
internal)
10 mA (24 V
DC
I/O)
Cable length – digital
inputs 30 m;
if longer (100 m max.) use shielded cable and contact
shield close to the controller.
Diagnostics 2 status LEDs at the front panel for diagnostics
Support of linear and
rotary axes Yes
Refresh rate 2 ms
Interfaces
Electronic wave Control pulses/Direction/Boost - inputs and outputs for
synchronisation with external sources or power stages
required driver current:
10 mA max. at 3 V, 30 mA max. at 5.5 V
ServiceBus For the parameterisation of external power stages with
ServiceBus to EXAM modules
Bus connection rear
side Proprietary phytron Bus and
interface to the INAM01, EXAM01
Communication and Programming
Programming Via phytron‘s programming environment phy LOGIC
TM
ToolBox
Communication Master-slave communication. The I4XM01 module is the
slave and communicates with the main controller module
MCM01.