phytron 10010115, Руководство пользователя

Страница: 15 / 56

phytron
3 To Consider Before Installation
Read this manual very carefully before installing and operating the CLD
+
.
Observe the safety instructions in the following chapter!
3.1 Qualified Personnel
Design, installation and operation of systems using the CLD
+
may only be
performed by qualified and trained personnel.
These persons should be able to recognize and handle risks emerging from
electrical, mechanical or electronical system parts.
WARNING !
By persons without the proper training and qualification damages to devices and
persons might result!
3.2 Safety Instructions
1. Please observe the earthing instructions chap. 6.3!
2. In case of supply voltages > 24 V:
The CLD must only be operated if CLD
+
housing and motor housing are
connected to protective earth.
3. The connectors SUPPLY and MOTOR should be locked with the fixing
screws.
4. Up to 3 minutes after turning off the supply voltage, dangerous voltages
may still exist within the device.
5. Be careful handling the connectors „Motor“ at the CLD
+
and any motor
cable coupling.
As long as the CLD
+
is connected to supply voltage, a hazardous voltage level
is present at motor connector and motor cable, even if the motor is not wired.
6. Up to 3 minutes after turning off the supply voltage, dangerous voltages
may still exist at the CLD
+
connectors .
13 MA 2112-A002 GB