phytron 10010115, Руководство пользователя

Страница: 13 / 56

phytron
11 MA 2112-A002 GB
Technical Data
Connector at power
supply cable
Phoenix Combicon connector, type MSTB 2,5/2-STF-5,08
Connector at motor
cable
Phoenix Combicon connector, type C 2,5/4-STF-5,08
Connector at I/O cable 2 x 12 pole Phoenix Mini Combicon connector,
type MC 1,5/12-ST-3,81
Connector at
ServiceBus cable 4 pole ServiceBus connector, type (A) DIN IEC 61076-3-107
(to PC)
4 pole ServiceBus connector, type (B) DIN IEC 61076-3-108
(to CLD
+
)
Wiring I/Os Double or reinforced insulation for 160 V
DC
against supply
and motor voltage as well as against temperature sensor
wires.
Inputs Inputs are opto-decoupled.
Triggering by push-pull-drivers or open collector
Input level 5 V or 24 V (depends on CLD
+
version)
Signal level 5 V 24 V
High 3 – 5.5 V 20 – 30 V
Low < 0.4 V < 3 V
Necessary
driver current
max. 10 mA (at 3 V) max. 10 mA (at 20 V)
max. 30 mA (at 5.5V) max. 20 mA (at 30 V)
Control pulses Maximum step frequency: 500 kHz
Minimum pulse width: 1 µsec
The step is done with the falling flank of the control pulse.
Motor direction When the optocoupler is energized, the motor rotates in the
reverse direction.
The direction of rotation signal should not be changed at least
1 µsec before the rising flank and after the falling flank of the
control pulse!
Boost
If the optocoupler is energized, the CLD
+
switches the current
to the selected value for the Boost current.