Installation PCANView
SYS TEC electronic GmbH 2003 L-1006e_2
19
6
Installation PCANView
PCANView is a Tool for monitoring CAN-Layer 2 messages or for
sending messages. It is installed automatically when you have
installed the driver for PCAN-Dongle or USB-CANmodul. But you
can install PCANView allone on a PC. For this you start
PCAN_DNG.EXE
in the directory
/Products/SO-840
. After
installation you find the program in the folder
programs/PCAN Dongle/PCANview Dongle
.
As interface to the CAN-Bus the PCAN-Dongle is used.
After start of PCANView you have to choose the hardware and the
IRQ and the IO-Adress (default IRQ 7 and 0x378 for PCAN-Dongle
at LPT1). Furthermore you choose the baudrate of 125 kBit/s. After
the selection of
OK
you see the following window:
