Phytec SYS TEC ELECTRONIC CANopen Chip164 Скачать руководство пользователя страница 2

Development Kit CANopen Chip164

© SYS TEC electronic GmbH 2003

L-1006e_2

In this manual are descriptions for copyrighted products which are not explicitly
indicated as such. The absence of the trademark (

) symbol does not infer that a

product is not protected. Additionally, registered patents and trademarks are
similarly not expressly indicated in this manual

The information in this document has been carefully checked and is believed to be
entirely reliable. However, SYS TEC electronic

 

GmbH assumes no responsibility

for any inaccuracies. SYS TEC electronic GmbH neither gives any guarantee nor
accepts any liability whatsoever for consequential damages resulting from the use
of this manual or its associated product. SYS TEC electronic GmbH reserves the
right to alter the information contained herein without prior notification and
accepts no responsibility for any damages which might result.

Additionally, SYS TEC electronic GmbH offers no guarantee nor accepts any
liability for damages arising from the improper usage or improper installation of
the hardware or software. SYS TEC electronic GmbH further reserves the right to
alter the layout and/or design of the hardware without prior notification and
accepts no liability for doing so.

 Copyright 2003     SYS TEC electronic GmbH. rights – including those of

translation, reprint, broadcast, photomechanical or similar reproduction and
storage or processing in computer systems, in whole or in part – are reserved. No
reproduction may occur without the express written consent from SYS TEC
electronic GmbH.

EUROPE

NORTH AMERICA

Address:

SYS TEC electronic GmbH
August-Bebel-Str. 29
D-07973 Greiz
GERMANY

PHYTEC America LLC
203 Parfitt Way SW, Suite G100
Bainbridge Island, WA 98110
USA

Ordering
Information:

+49 (0) 36 61 / 62 79-0
[email protected]

+1 (800) 278-9913
[email protected]

Technical Support: +49 (0) 36 61 / 62 79-0

[email protected]

+1 (800) 278-9913
[email protected]

Fax:

+49 (0) 36 61 / 6 32 48

+1 (206) 780-9135

Web Site:

http://www.systec-electronic.de http://www.phytec.com

2

nd

 Edition February 2003

Содержание SYS TEC ELECTRONIC CANopen Chip164



























Отзывы: