Phytec eGrabber-4plus, Руководство по оборудованию

Страница: 133 / 206

Driver Software

PHYTEC Meßtechnik GmbH 2004 L-608e_4
123
l
field-based digitizing with zoom
An image of the size 120 x 100 should be produced, for which the
original image is magnified with the factor 2 in X- and
Y-direction.
(a) Resolution / Scaling
It is sufficient to digitize a field. Without magnification 360 x 288
pixels are used. In order to allow the expansion we set 180 x 144
pixels : ppl=180, lines=144. The width/height ratio is maintained.
(b) Size of the section
Corresponding to the size of the window we set:
hsize = 120, vsize = 100.
(c) Positioning
With the parameter hpos and vpos the window section can be
shifted 180 - 120 = 60 pixels in X-direction and 144 - 100 = 44
pixels in Y-direction.
•
Full Frame Digitization
A 700 x 500 image should be delivered with resolution and
proportions that correspond to a TV image.
(a) Resolution and Scaling
For digitization, a frame is required. Since a full TV image serves
as the foundation the image resolution results in ppl=720 and
lines=576. The lines value in the vertical direction must be evenly
distributed to both half frames.
nOlines = nElines = ½ lines
nOlines = ½ 576 = 288
nElines = ½ 576 = 288