Press function button 3 corresponding to
,
turn<
> to set the flash frequency and
press<
>button.
Note
1.
High speed sync function is not available when using stroboscopic flash.
2.
Phottix Laso
receiver does not support MULTI mode. When master unit is set to
MULTI mode, the slave unit that uses Phottix Laso
receiver does not fire.
Gr: Shooting with a Different Flash Mode for Each Group
When using an EOS digital camera released since 2012, you can shoot with a
different flash mode set for each firing group, with up to 5 groups
（
A/B/C/D/E
）
.
The flash modes that can be set are E
①
-TTL
Ⅱ
/E-TTL autoflash,
②
Manual flash and
③
Auto external flash metering. When the flash mode is
①
or
③
, exposure is
controlled to result in standard exposure for the main subject as a single group. The
function is for advanced users.
1.
Set the flash mode to <Gr>
Press <MODE> button on master unit to set the flash mode to <Gr>.
2.
Set the firing group on the slave units
Operate and set the slave units one by one, and set a firing group
（
A/B/C/D/E
）
for all
the slave units. For slave unit settings, see the flash or wireless receiver’s instruction
manual.
3.
Set the flash mode
Set the flash mode of each firing group by operating the master unit.
While
is displayed, press function button corresponding to
and turn
<
>to set the group.
Press function button 2 corresponding to <*Mode> to select the flash mode of the
selected group from <ETTL>, <M>and<Ext.A>.
To turn off the firing of the selected group, press function button 1 corresponding to
and set it to <OFF>.
Repeat step 3 to set the flash mode.
